| 
Oil-Minder Jr. Pump and Control System
The Stancor Oil-Minder® Control System, when combined
with a pump, allows water to be automatically pumped from
elevator pits and industrial sumps without danger of ejecting
potentially harmful oily substances into sewers, rivers and
waterways. The product is engineered for efficient and trouble
free pumping, even under the most severe conditions. The
patented Oil-Minder® System has a proven record of
protecting valuable equipment and the environment while being
extremely cost effective.
Features
• NEMA 4x weathertight corrosion resistant fiberglass enclosure
• Stainless steel sensor probe
• Direct plug-in power source
• Alarms, lights, silence switch, and separate remote monitoring circuits
for oil and high liquid conditions
• Complete packaging insures quality of entire control pump system
• Patented – Pat. #4,715,785, #4,752,188, #6,203,281 and others pending
• Oil-Minder® System can be combined with a variety of different pumps
and valves
• Choice of: 115v or 220v (1 phase) OR 230v/460v/575v (3 phase)
• LED indicator lights for oil spill, power, high liquid level, overload, and
pump run
• UL 508 and 778 approved
• ENTELA approved
Click here
to see how the Oil-Minder System works.
The Stancor Oil-Minder® System is available in two
primary configurations, as follows:
The O/M Senior is the most fully equipped system and provides
the fastest, least expensive installation process. The O/M
Senior is equipped with a NEMA 4x junction box and a 25’ 8-pin
cable set that securely connects to the main control with
a single “push and turn” motion. The system reduces
electrical installation costs by approximately 75% compared
to “hard wiring” when locating the main control
in the machine room or another remote location.
The O/M Junior is a good choice where the main control can
be located in the same area as the pump pit or where the
main control will be located remotely but additional labor
and material cost for installation is not a consideration.
Comparative features of each model are as follows:
Feature included in package |
O/M Senior |
O/M Junior |
SE-40 (.4 HP) or SE-50
(.5 HP) 115V or 230V single phase pump |
X |
X |
Solid state NEMA 4x control
panel |
X |
X |
Separate LED indicator
lights on NEMA 4x control for A) oil alert, B) high
water, C) high motor amps, D) power to system, and
E) pump activation |
X |
X |
Self cleaning, hermetically
sealed stainless steel oil detection probe |
X |
X |
Float switches for pump
activation and high water alert |
X |
X |
Monitoring relay for alert
conditions at remote locations |
X |
X |
High decibel, water tight
horn and silence switch for alert conditions |
X |
X |
Direct plug-in activation
of entire pump and control system from the main control
panel (6’ cord and molded plug included) |
X |
X |
Factory hard wiring of
pump, oil probe, and floats into NEMA 4x junction box |
X |
|
Factory hard wiring of
pump, oil probe, and floats directly into main NEMA
4X control box
|
|
X |
Junction box with femaile
8-pin cable receptacle and disconnect |
X |
|
2” check valve |
X |
|
25’ 8-pin cable receptacle
installed in the NEMA 4x control panel |
X |
|
|
