For residential, industrial and municipal
wastewater applications. All solids are reduced to particles
allowing the use of small diameter piping connected
to the conventional sewage system.
Output:
2 HP & 3 HP
Construction
Completely watertight cable entry sealed with epoxy
resin. The individual cores are embedded in cast resin
to prevent water tracking.
Durable cast iron outer case with amply dimensioned
colling ribs achieves superior heat dissipation.
Motor:
Oil-free hermetically sealed, with built-in thermal
overload protector.
1 & 3 phase, 2 pole, 60 Hz 3450 rpm, Insulation
Class F=155°C, Protection type IP68. (50 Hz version
available upon request.)
Grinder & Impeller Ring:
Grinder impeller and shredder ring are replacable,
no need to take pump apart. The parts are made of
High Chrome Steel with hardness of 55-58 Rockwell
C to break up paper, textile material and soilid contaminants
in the wastewater.
Applications:
Individual residential and low pressure sewer applications.
Pump slurry or wastewater to a treatment plant,
lagoon, or gravity manhole through a discharge pipe
as small as 1.25" in diameter.
Waste treatment for villas, summer houses and other
residential areas which cannot be directly connected
to the existing sewage system.
